Chloride Ion Detection Kit for Blast Cleaned Surfaces | Elcometer 134S
Manufacturer: Elcometer
Part #: E134----1
Description: Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion or blistering before the full life of the coating has been reached.
To ensure that the chloride has been removed it is essential that the surface is tested before the coating is applied.
Elcometer 134S test method: a latex sleeve is filled with a Chlor*Rid extract solution and stuck to the test surface where the solution is worked against the surface to extract the salts. The titration tube is inserted and the results can be recorded.
Kit Contents:
- 4 x test kits
- titration tube snapper
- strap
- clip
- pre-measured bottle of Chlor*Rid extract solution
- sleeve
- titration tube
- operating instructions
Specifications:
Measurement Range | 1 - 60µg/cm² (1 - 60ppm) |
Scale Resolution | 1µg/cm² (1ppm) |
Dimensions | 185 x 125 x 110mm (7 x 5 x 4.5”) |
Weight | 250g (9oz) |
Literature: