Pirate Brand, S-Series - 6.5 CU FT., SINGLE OUTLET, FAST-STOP™ - Blast Pot, Portable, Pressure HOLD System, 12VDC Electric Controls
Pirate Brand, S-Series - 6.5 CU FT., SINGLE OUTLET, FAST-STOP™ - Blast Pot, Portable, Pressure HOLD System, 12VDC Electric Controls
Manufacturer: Pirate Brand
Part Number: 888-0432-33904PB-EP
Description: Portable abrasive blaster, 6.5 cu. ft.,150 PSI (10.3 BAR), Fast-Stop™ pressure hold system with 12VDC electric controls, AAV / APVII™ w/tungsten-carbide sleeve valves & moisture separator.
WHEN USING STEEL ABRASIVES, ELECTRIC CONTROL HANDLE #2 (888-2263-401PB) AND SEALED CONNECTOR(S) (PB-31131) ARE REQUIRED
Includes:
- BIG GUN™ Full Flow System
- Gravel-Guard™ Skid w/Fork Pockets
- 1-1/2” Pipe String / Air Valve
- 110’ X-Treme™ Duty Control Cord Assembly
- Electric #2 Control Handle
- BIG GUN™ Moisture Separator
Product Highlights:
A 6.5 CU. FT. CAPACITY (185 LITERS)
1. 150 PSI VESSEL (10.3 BAR)
2. A.S.M.E. SECTION VIII DIVISION 1
3. C.R.N. FOR ALL PROVINCES
B. PRESSURE HOLD SYSTEM
1. REDUCES ABRASIVE CONSUMPTION
2. REDUCES MOISTURE PROBLEMS
3. SMOOTHER STARTS & STOPS
C. ELECTRIC CONTROLS 12VDC
1. WHEN RUNNING OVER 100 FEET OF BLAST HOSE THIS ADDS ADDITIONAL SPEED TO STOPPING & STARTING THE BLASTING OPERATION
2. HELPS WITH FREEZING PROBLEMS IN COLD WEATHER
D. BIG GUN FULL FLOW SYSTEM PROVIDES
1. A ZERO PRESSURE DROP PATH FOR AIR & ABRASIVE TO TRAVEL TO THE BLAST NOZZLE FOR EVERY 1 PSI GAINED OR LOST IN ABRASIVE BLASTING = 1.5% PRODUCTION
2. A MUST FOR #7 & #8 NOZZLES
3. PREMIUM APVII ABRASIVE METERING VALVE STANDARD
4. FULL PORT COUPLING BLAST HOSE CONNECTION PROVIDES AN UNRESTRICTED PATH FOR AIR & ABRASIVE TO TRAVEL TO THE NOZZLE
E. HEAVY DUTY BIG GUN MOISTURE SEPARATOR
F. 1-1/2" GALVANIZED PIPING FOR CORROSION RESISTANCE
G. HEAVY DUTY FULL PORT BALL VALVES
H. EXTENDED LIFE SCHEDULE 80 HEAVY DUTY NIPPLE
1. WITHSTANDS ABRASIVE WEAR FOR LONGER LIFE
I. BOLT CLAMPS ON PUSHER LINE MAKE FIELD REPAIRS EASIER
J. NORMALLY CLOSED VALVES
1. AUTOMATIC PLUNGER VALVE II (APVII) PREMIUM ABRASIVE METERING VALVE WITH QUADRUPLE PLUNGER SEAL ARRANGEMENT SOLVES THE AIR & ABRASIVE CARRY OVER PROBLEM AS WELL AS THE PLUNGER & SEAL JAMMING PROBLEM NORMALLY ASSOCIATED WITH REGULATED LOW PRESSURE BLASTING APPLICATIONS AND OR THE USE OF STEEL ABRASIVE. SOLID MACHINED TUNGSTEN CARBIDE PLUNGER & SLEEVE PROVIDES FAR SUPERIOR WEAR RATES AND 100% CONSISTENT TOLERANCES. 1" NPT CLEANOUT PORT GIVES ACCESS TO OBSTRUCTIONS THAT MAY BE BRIDGING OVER THE METERING PORT ALSO ALLOWS YOU TO DRAIN THE VESSEL WITHOUT REMOVING THE VALVE.
2. FULL FLOW AUTO AIR VALVE FOR FAST STARTS & STOPS
3. HEAVY DUTY FILTERED CONTROL VALVE REDUCES STOPPING TIME WHEN CONTROL HANDLE IS RELEASED
K. BLOW DOWN MUFFLER REDUCES UNNECESSARY LOUD NOISE