Manual Cupping Tester | Elcometer 1620/4

Manual Cupping Tester | Elcometer 1620/4

Manufacturer: Elcometer

Part #: K0001620M004

Description: These robust and user-friendly instruments are used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05") thick.

The Elcometer 1620 has a 27mm (1.06") diameter hardened steel die in a clamping device and a 20mm (0.79") diameter punch. A hand-rotated crank and reduction drive moves the punch progressively into the sample.

The Elcometer 1620 has a digital gauge with an illuminated magnifier to accurately view the resultant damage and provides accurate readings of the cupping depth on an integrated gauge. Direct viewing of the fissures, cracks and tears in the coating of up to 10μm (0.4mil) can be viewed through the supplied x10 illuminated magnifying glass.

Packing List:

• Elcometer 1620 Cupping Tester
  
• gauge
  
• gauge holder
  
• zero setting sheet
  
• illuminated 10x magnifying glass with magnet
  
• mains cable (motorised versions only)
  
• operation instructions

Literature:

• Data Sheet
• Manual