website

Aftermarket Graco® Standard Air Assisted Airless™ AAM Tips (Non-OEM)

$75.00

 

 

 

Aftermarket Graco® Standard Air Assisted Airless™ AAM Tips (Non-OEM) for G15 and G40 Spray Guns

Manufacturer: Total Finishing Supplies

Part Number: 190833XXX

Comparable to OEM Part Number: 63-111-XXX

Description: Aftermarket Graco® Standard Air Assisted Airless™ AAM Tips (non-OEM). AAM tips for G15 and G40 spray guns

Comparable to Graco® 63-611-XXX

These Graco® air-assisted airless pin spray tips are used with air-assisted airless gun models G15™, G40™, Silver Plus™, and Mini Merkur™. With our wide selection of aftermarket Graco® non-oem sprayer tips, you will always achieve a soft spray atomization in various spray patterns and orifice combinations when the proper paint filters are used. Whether you require our standard or fine finish pre-atomizer versions for your air-assisted sprayer, you can find the right paint spray tips to solve all your fluid dynamics requirements.

By administering a small amount of air to aid in completing the pattern formation, you are able to attain the fine finish results required while greatly reducing excessive bounce back. Applying the spray coating at significantly lower pressures than a normal airless setup, your air-assisted airless™ spray equipment will undergo less wear and tear. This results in less maintenance and clean up of your air-assisted airless™ spray equipment allowing it to last longer. Additional air-assisted airless™ aftermarket Graco® non-oem paint tips available upon request and aftermarket Graco® non-oem air-assisted airless™ high-pressure hoses in stock.

NOTES:

Graco®, PerfomAA™, Merkur™  and Reverse-A-Clean® (RAC) Tip are registered trademarks of Graco®, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit Graco®, PerfomAA™, Merkur™ and Reverse-A-Clean® (RAC) Tip spray equipment. They are not, however, manufactured, endorsed, or sponsored by Graco® or any of their affiliates, and no warranty by Graco®, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Graco® and is not one of their authorized distributors.

Tip Size Degree Orifice Size Fan Pattern OEM Part Number
107 10 0.007 2-4 inches 63-611-107
109 10 0.009 2-4 inches 63-611-109
111 10 0.011 2-4 inches 63-611-111
207 20 0.007 4-6 inches 63-611-207
209 20 0.009 4-6 inches 63-611-209
211 20 0.011 4-6 inches 63-611-211
213 20 0.013 4-6 inches 63-611-213
215 20 0.015 4-6 inches 63-611-215
217 20 0.017 4-6 inches 63-611-217
219 20 0.019 4-6 inches 63-611-219
221 20 0.021 4-6 inches 63-611-221
307 30 0.007 6-8 inches 63-611-307
309 30 0.009 6-8 inches 63-611-309
311 30 0.011 6-8 inches 63-611-311
313 30 0.013 6-8 inches 63-611-313
315 30 0.015 6-8 inches 63-611-315
317 30 0.017 6-8 inches 63-611-317
319 30 0.019 6-8 inches 63-611-319
321 30 0.021 6-8 inches 63-611-321
409 40 0.009 8-10 inches 63-611-409
411 40 0.011 8-10 inches 63-611-411
413 40 0.013 8-10 inches 63-611-413
415 40 0.015 8-10 inches 63-611-415
417 40 0.017 8-10 inches 63-611-417
419 40 0.019 8-10 inches 63-611-419
421 40 0.021 8-10 inches 63-611-421
509 50 0.009 10-12 inches 63-611-509
511 50 0.011 10-12 inches 63-611-511
513 50 0.013 10-12 inches 63-611-513
515 50 0.015 10-12 inches 63-611-515
517 50 0.017 10-12 inches 63-611-517
519 50 0.019 10-12 inches 63-611-519
521 50 0.021 10-12 inches 63-611-521
609 60 0.009 12-14 inches 63-611-609
611 60 0.011 12-14 inches 63-611-611
613 60 0.013 12-14 inches 63-611-613
615 60 0.015 12-14 inches 63-611-615
617 60 0.017 12-14 inches 63-611-617
619 60 0.019 12-14 inches 63-611-619
621 60 0.021 12-14 inches 63-611-621
711 70 0.011 14-16 inches 63-611-711
713 70 0.013 14-16 inches 63-611-713
715 70 0.015 14-16 inches 63-611-715
717 70 0.017 14-16 inches 63-611-717
719 70 0.019 14-16 inches 63-611-719
721 70 0.021 14-16 inches 63-611-721
815 80 0.015 16-18 inches 63-611-815
817 80 0.017 16-18 inches 63-611-817
819 80 0.019 16-18 inches 63-611-819
821 80 0.021 16-18 inches 63-611-821
917 90 0.017 18-20 inches 63-611-917
919 90 0.019 18-20 inches 63-611-919
921 90 0.021 18-20 inches 63-611-921

 

** Minimum Order $25 to qualify for Free Shipping

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods