website

Special Offer - TFS-X™ Black Premium Gravity Feed Spray Gun Pack w/ H/O Pressurized Cups & Regulator

$1,079.41 $1,095.00

Special Offer

TFS-X™ Black Premium Gravity Feed Spray Gun Pack w/ H/O Pressurized Cups & Regulator

TFS-X™ Black Premium Gravity Feed Spray Gun Pack w/ PPS System

Includes:

    • TFS-X™ (Black Anodized)
    • 650 mL 3M PPS Cup
    • 3 Lids and Liners
    • Type S2 Adapter
    • 1.0 mm, 1.3 mm, 1.5 mm & 1.7 mm Nozzle / Needle Setups
    • Multi-Purpose Wrench
    • Socket and Ratchet Assembly for Nozzles
    • Blue Pressure Reduced Air Cap
    • Green HVLP Air Cap 24-1352
Features:
    • Extreme material atomization
    • Extreme transfer efficiency
    • Extreme material application speed
    • Built for the professional finisher
    • All stainless steel fluid passages
    • Lightweight and ergonomic

 Specifications:

    • Air Inlet: 1/4” NPS (m)
    • Fluid Inlet: 16 mm x 1.5 mm (f )
    • Weight: 20 oz
    • Requires 13.5 CFM

H/O Cup and Regulator Option (both required)

The H/O Cup and Regulator allow for the cup to be pressurized (up to 10psi) vs relaying on gravity alone, providing a cup gun solution for spraying higher viscosity coatings without thinning. This improves the quality of any finish with less waste. HIGHLY recommended for 2k coatings. 

 

 

The 3M™ PPS™ (Paint Preparation System) is a unique, closed paint system that eliminates the need for separate mixing cups and filters. Instead, paint is mixed in a liner bag which marries to a direct filter and is then mounted on the spray gun with a dedicated adapter. As freshly filtered paint is dispensed, the liner bag collapses, allowing the spray gun to function at any angle. Liner bags and filters are disposable, leaving only the spray gun and adapter to be cleaned. The 3M™ PPS™ Paint Preparation system is a cleaner, faster system, safe from outside contamination and offers considerable time and solvent savings on gun and parts cleaning.

PPS™ Key Features
• Up to 70% savings of clean solvent
• Closed system reducing outside contamination
• Faster system from mixing to disposal
• Spray gun can function at any angle
• 850 ml size
• Less operator exposure to solvents and reduction in VOC’s

New Series 2.0 PPS™ Features
• Four-point connection on the adapter to the lid for increased stability
• Quarter-turn lid-locking system for quick assembly and disassembly
• Larger fluid passage opening in the adapter and lid to allow more material flow
• Standard hard cups have measurements printed directly on the plastic
• Lids and collars are now combined into one locking piece

The H/O pressurized cups by 3M™ offer an easy and clean solution to spraying thicker viscosity materials. Screw on type lid collar to ensure a nice and secure seal when pressurized.

3M PPS 2.0 Cup System - Brochure

By-Pass Regulator & Gauge

The C.A. Technologies by-pass regulator and gauge is ideal for any pressure feed spray guns that do not have a “ported head” as a means of pressurizing the cup. The regulator connects to the air inlet fitting on most pressure feed spray guns (bottom of spray gun handle) and will allow for air regulation to the pressure cup while also allowing air pressure to pass through unregulated to the spray gun for atomization. We recommend 3-5 psi for most pressure cups. (Most pressure cups will have a 10 psi maximum pressure).

Parts and Accessories

 

  • Repair Kit P/N 10-161
  • Green HVLP Air Cap 24-1352
  • C.A. Tech Material Nozzle, 300H Series
  • Needle Assembly
  •  

     

    TFS-X™ Manual









    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods