Aftermarket KREMLIN® High Pressure Screen Filters 55–140 Mesh (Non-OEM)
Manufacturer: Total Finishing Supplies
Description: Aftermarket KREMLIN® High Pressure Screen Filters 55–140 Mesh (Non-OEM)
Regardless of the amount of times your spray coating is filtered, all spray tips are bound to get clogged at some point in time. With the help of our fine tip broaches, you can clear a blockage simply and easily allowing you to get the most profitability out of your sprayer tips. In combination with the universal pre-orifices, you can produce a fine finish result. Pre-orifices will create a more complete atomization of the spray pattern allowing you to spray at lower pressures, which ultimately results in an extended life of your high-pressure nozzle. With the use of our microfilters for your air-assisted airless spray tips, you will receive all the benefits of a pre-orifice while it filters one final time before the spray coating is applied.
Used behind a flat tip to achieve a fine finish spraying application. The shape of the pre-orifice will eliminate spitting effects at greatly reduced pressures.
KREMLIN®, AIRMIX®, and Xcite® are registered trademarks of Sames Kremlin SA or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit Graco®, Binks®, KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Graco®, Binks®, Sames Kremlin SA or Exel Industries SA or any of their affiliates, and no warranty by Graco®, Binks®, Sames Kremlin SA, Exel Industries SA, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Graco®, Sames Kremlin SA or Exel Industries SA and is not one of their authorized distributors.