BECCA 3P System – Clean & Polish, Waste Management System

 

 

BECCA 3P System – Clean & Polish, Waste Management System


 

At BECCA we have developed a series of tools that make up the 3P System. We selected tools for the spray gun cleaning process based upon the testing and feedback received from top painters across the country. As a result, we developed tools to achieve maximum success using little effort in a short period of time.

Spray guns used with solvent based materials can primarily be cleaned with solvent however, waterborne materials are more difficult to clean. The standard process of chasing waterborne material with solvent (usually acetone) creates more issues than it solves. For instance, solvent mixed with waterborne paint causes waterborne paint to become and behave like a solvent paint. The remaining paint in or on the spray gun will create a strong adhesion to the surface, eventually causing performance problems or corrosion.

BECCA - 3P System logoWhat is 3P?

It stands for Three Processes for Success!

 

Process One: Begin by a detailed cleaning and polishing of your paint spray gun. This will get it back to a like-new condition. If your gun is new move on to Process Two

.
3P System Infographic - Process 1

Process Two: Now implement the BECCA cleaning system for primer/sealer, base coat, clear coat, or two-component materials or single-stage materials.


3P System Infographic - Process 2

Process Three: Finishing up, select a waste management system that best handles the particular materials you are using whether waterborne, solvent, multi-stage, two-component, or single stage.


3P System Infographic - Process 3

 

The BECCA 3P System takes Spray Gun Cleaning to the ultimate level. This system provides a long term solution that has:

  • High Level of Cleaning
    • If all steps of the process are followed then the gun will be like new all the time
  • Very Low Cost to Operate
    • Low Maintenance costs
    • Only uses a small amount of compressed air
  • Very Low waste Generation
    • Hazardous waste
    • Regular Waste

BECCA’s 3P System provides an easy, and effective method for cleaning paint spray guns like no other competitive paint gun cleaner.

*Contact our team for more detailed information on this new system!

Your Shop

Does This Look Like Your Shop?

BECCA found in its studies that the majority of painters (8 out of 10) are not using the Spray Gun Cleaners as intended:

  • When failing use spray gun cleaner at all…
    Such as cleaning their paint spray guns over a waste drum with a ketchup bottle!
  • Many use a paint spray gun cleaner that is not functioning properly, therefore the spray paint gun is not being cleaned properly. Therefore resulting in manually cleaning as before with a ketchup bottle.
  • The Results, a poor performing paint spray gun and producing more hazardous waste!

The above cleaning processes provide poor results!

Dirty Shop

Does This Look Familiar?

Spray Gun Inside Poor - 1

Looks great on the outside               How they look on the inside!

Spray Gun Inside Poor - 2

3P System

The BECCA 3P System was designed to provide a designed and tested process that delivers consistent cleaning of paint spray guns.

 

Process #1 – Clean & Polish

Dirty Spray Gun

Step One - Clean And Polish - Dirty Spray Gun

 

Cleaned & Polished Spray Gun

Step One - Clean And Polish - Polished Spray Gun

 

Process #2 – The BECCA Spray Gun Cleaning System

Step Two - BECCA Cleaning System - Machines

 

Process #3 – Waste Management System

Solvent

Step Three - Waste Management System - Solvent

Waterborne

Step Three - Waste Management System - Waterborne

 

The Tools

BECCA’s Tools make significant difference in the performance of the 3P System. Each tool has a specific characteristic that makes the cleaning process perform.

Tools - 1

 

Knowledge HUB