C.A. Technologies C20 Pumps

 C.A. Technologies C20 Pumps

Page Under Construction - Last Updated 12/23/2022


Description: Air Assist Airless 20:1 Fine Finish Pump

Configuration Options:

  • Upper Seal (A): Select Self-Adjusting (S) or Manual Take-Up (M)
  • Lower Seal (B): Select U-Cup (C) or V-Packing (P)
  • Fluid Inlet (C): 3/4" NPT (0)
  • Fluid Outlet (D): 1/4" NPS (M), with optional Filter Assembly (F), and Stainless Steel Filter Assembly (FSS).

The New Air Assist Airless pump from C.A.T. is an all-stainless 20:1 ratio pump for higher viscosity materials and multi-gun operation, it incorporates a totally enclosed throat seal to reduce contamination and a sight gauge for ease of checking lubricant levels. This durable and dependable pump is for continuous operation with a 2 GPM displacement for single or multiple gun applications (8 guns up to 13 thousandths tip). The air motor magnetic no-stall trip mechanism insures smooth pump stroke transition with no "surge" or "wink" in the spray pattern maximizing transfer efficiency. The fluid section is all stainless steel and can be used for most solvent and waterborne coatings, paints, pigmented lacquers, pre, and post-catalyzed materials, and primers. The new "Cat Fast Clamp" makes for easy and rapid removal for maintenance of the fluid section from the air motor. These were built for easy "field" repairs with fewer parts lowering maintenance costs and equipment downtime. An optional separate fluid section fluid filter with multiple outlets is also available. The standard fluid section utilizes a spring seal configuration on the lower portion and a self-adjusting "V" packing on the upper portion. An optional self-adjusting "V" packing for the lower portion is also available for more abrasive coatings.

We are standing by to assist you if you have any questions! 

Site Navigation - C.A.Technologies C20 Pumps