Binks Trophy Series Touch-Up Gravity Feed Manual Spray Gun

$564.00

Trophy Series Touch-Up Gravity Feed Manual Spray Gun

Manufacturer: Carlisle Binks

Part #: 1466-XXXX-XXXX

Description: Binks Trophy Series Touch-up Gravity Spray Gun is the premier spray gun for use in gravity feed touch-up and light production spray applications and sets a new standard in durability, ergonomics, and atomization. The lightweight ergonomic design offers unsurpassed comfort and control. The latest advanced atomization technology has been incorporated for achieving consistent, fine finishes when spraying a wide range of industrial coating applications. Binks Trophy Series Touch-up Gravity Spray Guns are offered in two different atomization technologies: HVLP and LVMP.

Trophy Touch-Up spray guns are available in the following technologies:

  • LVMP (Green) - (Low Volume Medium Pressure) Also referred to as Trans-Tech, provides equal to or greater transfer efficiency at slightly higher air pressures than HVLP.
  • HVLP (Blue) - (High Volume Low Pressure) Air pressure is less than 10 PSI at the air cap meeting all European and USA standards and regulatory requirements.

Refer to the following chart for air cap specifications:

LVMP - Low Volume Medium Pressure Air Cap Specifications:
Air Cap Spray Pattern CFM @ 30 psi Gun Inlet
B1 6" 7.8
HVLP - High Volume Low Pressure Air Cap Specifications:
Air Cap Spray Pattern CFM @ 10 psi Cap Pressure
C1 6" 6.5

 *All models come with stainless steel fluid nozzles and needles*

Ergonomics taken seriously - Binks Trophy Series Spray Guns feel different by design. They’re lighter and are easier to handle over longer periods of time. That means operators can spray for longer periods with less fatigue and injury. This can make a big difference to productivity and your profitability. That’s why we take ergonomics so seriously.

  • Light weight – one of the lightest, top quality spray gun range available.
  • Designed for the hand – our gun designers tested a variety of hand sizes and grips to come up with the ideal design for the Trophy. The form is ultimately about function and reduced stress.
  • Trigger pull – the easy light trigger pull action is created by the unique, built-in stabilisation features.
  • No kick air valve – delivers the smoothest pull on the market. Virtually eliminates any recoil from triggering.
  • Knobs and air cap rings – all the hand adjustments have been designed and manufactured to make it virtually effortless to “dial –in” your settings or remove parts for maintenance or substitution.

Manual

Parts View

Parts and Accessories:

Fluid Needles and Nozzles -

Air Caps -

Spare Parts List (Refer to Manual) -

Ref. No. Part No. Description
1 54-6211 AIR CAP RETAINING RING ASSEMBLY
5 SEE AIR CAP CHART AIR CAP
7 SEE NOZZLE CHART FLUID NOZZLE
8 54-6215-K5 BAFFLE/SEPARATOR (KIT OF 5)
9 54-6216 SIDE PORT VALVE ASSEMBLY
10 SOLD IN KIT 54-6216 RETAINING CLIP
11 SOLD IN KIT 54-6216 BODY BUSHING
12 SOLD IN KIT 54-6216 O-RING
13 SOLD IN KIT 54-6216 SIDE PORT STEM
14 SOLD IN KIT 54-6216 PIN
15 54-6131-K AIR VALVE SERVICE KIT
16 SOLD IN KIT 54-6131-K FRONT SEAL – AIR VALVE
17 SOLD IN KIT 54-6131-K FRONT AIR VALVE SEAL
18 54-6220 AIR VALVE SPINDLE
19 SOLD IN KIT 54-6131-K AIR VALVE SPRING
20 SOLD IN KIT 54-6131-K REAR SEAL – AIR VALVE
21 SN-66 HOUSING
22 47-6851 NEEDLE – STAINLESS STEEL (STD.)
- 47-6852 NEEDLE – PLASTIC TIP
23 54-6223-K SPRING/PAD ASSEMBLY
24 54-6111 KNOB – NEEDLE ADJUSTING
25 54-6130-K NEEDLE PACKING KIT
26 SOLD IN KIT 54-6130-K NUT – PACKING
27 SOLD IN KIT 54-6130-K SPRING FOR PACKING
28 SN-2-K3 NEEDLE PACKING
29 54-6218 TRIGGER
30 54-6228-K TRIGGER SCREW NUT KIT
31 SOLD IN KIT 54-6228-K TRIGGER SCREW
32 SOLD IN KIT 54-6228-K TRIGGER NUT
33 54-3513 SPINDLE CAP
34 JJ-42 AIR ADJUSTING VALVE ASSEMBLY
35 JJ-30 FITTING – AIR INLET
37 SPN-7 TOOL – SEAL INSERTION
39 54-4458 4 OZ. GRAVITY CUP ASSEMBLY
40 54-4459 LID ASSEMBLY

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods