Uni-Ram UM120 Spray Gun Washer, For Waterborne Paints
Uni-Ram UM120 Spray Gun Washer, For Waterborne Paints
UM120 Spray Gun Washer, For Waterborne Paints
Manufacturer: Uni-Ram
Part Numbers: UM120W & UM120WS
Description: The UM120W cleans one waterbased spray gun at a time. The Uni-Ram UM120W Manual Water-Based Gun Washer with Wash Nozzle is designed for efficient manual cleaning of spray guns. It utilizes water to remove paint from the spray gun and features a wash gun that delivers high-pressure water to clean the paint channel. A flow-through brush effectively removes paint from the exterior, while an air gun dries the spray gun and a spray-out function ensures the paint channel is thoroughly cleaned. The eco-friendly “GREEN” Water Recovery System incorporates filtration after treatment with Uni-Ram’s flocculating agent, COAG-KLEEN FP, allowing the recovered water to be reused or safely disposed of, significantly reducing water consumption.
Dimensions:
119 cm W x 43 cm D x 117 cm H
Weight:
170 lb (77 kg)
You will be contacted with a freight quote for shipping
Features:
• Stainless steel cleaning tank for long life.
• Wash gun and brush are powered by Uni-ram's 5 cm (2") dual diaphragm
pump.
• "Green" Water Recovery System
• The used water is treated with Uni-ram's flocculating agent,
COAG-KLEEN FP granules, then filtered. COAG-KLEEN FP causes
the waste paint to clump at the surface of the water. The filter captures the
waste paint, allowing the clean water to pass to the capture container.
• Used water can be reclaimed up to 8 times reducing consumption and
disposal costs, it is a "Green" approach.
• CE Approved.
• Complete with pressure regulator. Minimum air pressure is 6 bar (85 psi).
2" Dual Diaphragm Pump:
• Air Consumption: 1 CFM
• Output: 1.3 US Gal (5 litres)
per minute at 75 PSI
(5.1 kg/cm2)
Manual Waterborne Spray Gun Cleaning:
Waterborne spray guns are cleaned effectively with 3 cleaning tools.
• Wash gun delivers high pressure water to flush the fluid passage in under 15 seconds.
(See photo below)
• Flow-through brush removes paint from the outside of the spray gun.
• Air gun dries the spray gun.
• The cleaning power of water is enhanced by the addition of AQUA-KLEEN, Uni-ram's
waterborne cleaner.
• The used water can be recovered and reused reducing water consumption and disposal costs, it is a "Green" approach.
Safety:
• Always disconnect this machine from power sources before performing maintenance.
• Do not smoke or use near open flames, sparks or heat.
• Make sure all ground wires are connected and that unit itself is grounded properly.
• Wear safety eyeware, respiratory protection and protective clothing.
• Wear deluxe extended length neoprene gloves; SAS PN 6588 or Thicksters PN 6602-20 through 6605-20
CAUTION
FOR WATERBORNE PAINTS ONLY
THIS UNIT IS NOT DESIGNED FOR USE WITH SOLVENT BASED PAINT
Parts and Accessories:
- DIAPHRAGM PUMP
- 102-8200 AQUA-KLEEN Paint Residue Cleaner
- 102-8300 COAG-KLEEN Flocculant Granules, 2 KG
- 102-8125 Primary Filter Bag
- 102-8126 Secondary Filter Bag
Literature:
Tariff Notice:
Please note that these products are sourced internationally and may be subject to additional import tariffs. As a result, your final order total may include an upcharge to cover these tariff-related costs. We strive to keep all fees transparent and will notify you of any adjustments before processing your payment. Thank you for your understanding and support.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
