Skip to content
Comparison of TriTech Airless Sprayers - The Delorean of Airless Pumps
What is an airless paint sprayer?
Airless paint sprayers use hydraulic force created by a pump to force paint through a tip with a metered orifice at high pressure. This results in the break up of the paint material into a spray pattern that’s distributed in an even coat and can be layered to meet your preferred thickness. There are a lot of tip sizes that also allow the operator to select the flow rate and the fan width of the spray pattern.
Why choose TriTech airless paint sprayers?
All TriTech airless paint sprayers are made in the USA. When compared to similar airless sprayers, TriTech airless paint sprayers are preferred in the industry because of their advanced construction and precise applications.
TriTech units are also constructed of all stainless steel and aluminum metal exteriors making them more durable and easier to clean than plastic exteriors. This feature alone makes them stand out above all others on the market….sort of the Delorean of airless sprayers.
How many TriTech airless paint sprayers does Total Finishing Supplies carry?
Total Finishing Supplies carries six (6) T-series airless paint sprayers - the T3, T4, T5, T7, T8, T9, and T11. All of the TriTech airless paint sprayers have precision motor control (PMC).
What is precision motor control?
Precision motor control or PMC matches the motor speed to the pressure and tip size selected by the user. This allows for no pulsation at any pressure with any size tip, giving your project a uniform finish.
What are the advantages and disadvantages of an airless sprayer?
Advantages
- Airless sprayers are very portable and typically plug into a conventional 120V outlet. (220V Available)
- No compressed air is used or required.
- They can spray very thick and viscous materials and a very fast volume.
- Single hose to the gun. So best ergonomics of any spray gun series.
- Available in extremely high pressure ratings. It could spray peanut butter if you needed too!
Disadvantages
- Due to the relatively course spray, airless guns are not the first choice for many fine finishing applications. However, that is changing with the development of things like TriTech Ultra tips and the pump's ability to hold and maintain low fluid pressures, something that has not been possible in the past by electric airless pump systems from other brands.
- Airless guns are not HVLP compliant and therefore are not legal to use in a factory setting where pairing operations occur regularly. In fact any area that has an air quality district would strictly prohibit the use of a typical airless gun. You could however use an air-assisted airless gun like the TFS MAMBA with an additional compressed air source and meet the HVLP air quality district's requirements.
- Airless systems also take a bit of material to load as compared to a gravity cup gun or comparable guns. So you may only want use an airless system on projects where you are going to spray a gallon or more. TriTech offers a gravity hopper for small runs so that you can utilize every last drop possible. (Show Pic)
Which TriTech airless paint sprayer is right for me?
TriTech airless paint sprayers are built for professional use. Benefits include:
- Precision motor control - PMC matches the motor speed to the pressure and tip size selected
- No pulsation at any pressure with any size tip
- No cylinder to wear out
- Balanced fluid manifold
- All metal construction
Click on any TriTech airless paint sprayer below for specific product details. If you need assistance in deciding which sprayer best meets your requirements, please contact us!
T3 (COMING SOON!): At only 30.8 lbs., the T3 is the most durable, compact and lightest professional airless sprayer in its class. With the most advanced pressure control in the industry, the T3 is designed for small to medium sized projects and is ideal for contractors who spray up to 50 gallons per week. Available for pre-order April 2023.
- Maximum PSI: 3300 (226 BAR)
- Maximum tip size: 0.023
- Maximum GPM: 0.57 (2.17 LPM)
- Maximum PSI: 3300 (226 BAR)
- Maximum tip size: 0.025
- Maximum GPM: 0.67 (2.55 LPM)
- Maximum PSI: 3300 (226 BAR)
- Maximum tip size: 0.027
- Maximum GPM: 0.77 (2.93 LPM)
- Maximum PSI: 3300 (226 BAR)
- Maximum tip size:
- One gun: 0.029
- Two guns: 0.017
- Maximum GPM: 0.90 (3.42 LPM)
- Maximum PSI: 3300 (226 BAR)
- Maximum tip size: 0.031
- Maximum GPM: 1.05 (4.00 LPM)
- Maximum PSI: 3300 (226 BAR)
- Maximum tip size: 0.033
- Maximum GPM: 1.17 (4.45 LPM)
How does the TriTech portfolio of airless paint sprayers compare to Titan's or Graco's portfolio?
The chart below compares the TriTech airless paint sprayer portfolio with that of Titan (red) and Graco (blue). Notice that in each instance, TriTech has a higher flow rate (measured in GPM or gallon per minute) at nearly or exactly the same tip size as the competition.
What types of airless spray guns are available from TriTech?
T360 - 3600 PSI (245 BAR)
The T360 is a professional grade, high-quality airless spray gun made from aircraft quality aluminum forgings and extrusions for durability and light weight. All other wetted parts are high-quality stainless steel providing exceptional strength and reliability.
T380 - 4000 PSI (262 BAR)
The T380 is designed to work under higher pressure than other competitive guns for a broader range of applications. The aircraft quality aluminum alloy handle, stainless steel and tungsten carbide valve assembly, and hose swivel are all precision machined for reliable performance.
T420 - 4200 PSI (290 BAR)
The T420 is similar to the T-380 but has a higher shut off pressure rating at 4200 PSI. The aluminum alloy handle, stainless steel and tungsten carbide valve assembly and hose swivel are all precision machined for reliable performance, day in and day out.
T720 - 7200 PSI (496 BAR)
The high-strength aluminum alloy handle is lightweight, solid, and strong two-piece forging and extrusion that features an anodized protective finish that is highly corrosion-resistant. All internal wetted parts are precision machined from stainless steel and tungsten carbide for maximum duty life. A large, one-hole diffuser provides increased fluid flow when spraying viscous materials.
T750 - 7500 PSI (517 BAR)
The T750 has a high-strength aluminum alloy handle that is both light-weight yet very hard. It has an anodized protective finish and is highly corrosive resistant. The spring and valve-stem are calibrated to provide positive shut-off at maximum pressures. The shut-off spring is located outside the fluid passages for reduced friction and longer service life. All internal wetted parts are precision machined from stainless steel and tungsten carbide for maximum duty life.
MAMBA Air-Assisted Airless Manual Paint Spray Gun - 2900 PSI (200 BAR)
The MAMBA Mix Tech 200 bar manual spray gun delivers exceptional performance, value, and finish quality. With a high transfer efficiency, the MAMBA Mix Tech uses the TriTech reversible Ultra Tips, which are already known to be the best airless tips in the industry. We then take it farther by introducing a small amount of atomizing air to create an even finer spray pattern than is achievable with airless only. The gun is so comfortable and can be used for both airless and air-assisted styles of spraying.
Are there other types of accessories for TriTech airless paint sprayers?
Yes. Total Finishing Supplies also sell an inline airless spray gun and a spray roller.
T370 Inline Airless Spray Gun - 3600 PSI (248 BAR)
The T370-IL is part of the TriTech line of airless spray guns. It has all stainless steel wetted parts, a stainless steel swivel, and there's a filter in the handle.The 360° rotation eliminates the need for difficult positive alignment. Paint sprayer guns can be rotated to get into areas that are difficult to spray.
Our revolutionary Universal Spray Roller will fit on most off the shelf roller frames from 6” to 8” wide. This is the first of its kind saving time and money with no overspray. With our 5-axis slide block assembly you can position the tip precisely under or over the roller for perfect coverage. The pole swivel allows the operator to rotate the tip extension or extruded pole 360° for hard to reach areas.
The pole comes with the T370IL inline airless spray gun made from all stainless steel for long life. Our Universal Spray Roller will save you time and money.
For more information or to find out which airless sprayer and paint spray gun work best for your business, email us at sales@totalfinishingsolutions.com or call us at 503-545-3176. We're always on standby to help.