Series 410.09 & 600.12 Thick-Film / Mortar Pumps
Manufacturer: WIWA
Part Number: 700022X
Description: The WIWA series 410.09 and 600.12 is perfectly suitable for the application of epoxy and water based thick-film materials and mortars, such as cement mortar, cement-bound fire protection materials, cement slurry and filled vinyl esters.
In contrast to screw pumps, WIWA thick-film pumps can be flushed and cleaned with diluting agents.
The pump is a first choice when it comes to the transfer of epoxy based materials. Due to the use of quick release couplings, the material pumps, which consist of only a few parts, can be quickly disassembled, cleaned and reassembled, which is highly beneficial with short processing times, which are quite common today.
The feed funnel can also be simply removed. With this quick maintenance the downtimes, especially in construction site applications, can be reduced considerably. These large capacity pumps are designed with extra large flow passages, and due to the slow pumping speed only suffer very low wear, even when transferring high amounts of material.
Specifications:
| Model 410.09 | Model 600.12 | |
| Pressure Ratio | 9:1 | 12:1 |
| Max. Fluid Pressure | 72 bar (1044 psi) | 96 bar (1392 psi) |
| Output per cycle | 410 cc (14 oz) | 600 cc (20 oz) |
| Output at 60 Cycles | 24.6 L (6.5 gal.) | 36 L (9.59 gal.) |
| Air Motor Plate Diameter | 140 mm (5.5 in.) | 200 mm (8 in.) |
| Stroke Length | 120 mm (4.7 in.) | 120 mm (4.7 in.) |
| Max. Inbound Air Pressure | 8 bar (116 psi) | 8 bar (116 psi) |
| Min. Recommended Air Compressor Rating |
3000 ltr./min (100 cfm) | 3000 ltr./min (100 cfm) |
| Inbound Air Port (BSPP) | 1/2“ | 1" |
| Inbound Fluid Fitting (BSPP) | 2" | 2" |
| Outbound Fluid Port (BSPP) | 1" | 1" |