The most effective low cost product on the market. This unit provides one micron filtration of water and dirt in compressed air lines. Rated at 60 SCFM, these units are recommended for point of use applications. Features include manual drain, heavy duty metal bowl construction, easy spin-off cartridge replacement. Also included are metal regulator/s and glass faced gage for accurate pressure control. Maximum air pressure is 150 PSI.
Filters / Coalescers
The filter / coalescer is a two stage combination unit that offers the finest system for removal of water, dirt and oil
in the industry. Due to the prefilter design this unit may be used in high contamination areas without high element replacement rates. The first stage removes particles and water while the second stage removes oil contaminants. This unit is rated at 60 SCFM and removes water, dirt and oil to 0.01 micron at 98.99998% efficiency. For point of use operation.
This unit is a point of use oil/water filter with a desiccant drying cartridge for single gun painting operations where dry clean air is critical. Perfect for low volume shops.
Filter / Dryer
This unit is a point of use two stage oil/water filter with a desiccant drying cartridge for single gun painting operations where dry clean air is critical, such as automobile or fine wood finishing. Desiccant unit has an indicator to show when the unit is saturated and needs replacement. Unit comes with ball valve at inlet and regulator for single gun regulation. This is what all fine finishers should have. Maximum flow is 25 SCFM and rated to one (1) micron.
Main Line Combo
Combo unit is designed to remove bulk oil, dirt and water to 0.01 microns. Unit combines first stage separator and second stage coalescer. Perfect for removing contaminants to extend life of down stream units. Second stage comes with filter load indicator while auto drains are standard on both units. Rated at 90 SCFM and has 3/4” ports.