Wagner Zip 52 Low Pressure Pump

Zip 52 pneumatic double diaphragm pumps are designed with a reduction in air consumption coupled with better performance and maximum reliability. The exclusive design enables its use for corrosive, abrasive, and highly viscous liquid media. ZIP pumps cover a broad application spectrum, including the feeding of paint supply systems; the feeding and circulation of printing ink, solvents, paints, chemicals, and oils; the disposal of liquid waste; the supply of flow viscosity adhesives; and filling/emptying of tanks, drums, and containers. These pumps are offered in aluminum and stainless steel with a volumetric flow of 13.7 gal/min and 1/2” material inlet/outlet size for an extended range of materials.

High efficiency and performance

• The optimized design with less dead space enables rapid color change and cleaning, and a reduction in the amount of solvent required

• The air motor ensures the highest performance with reduced air consumption; requires no additional lubrication and suffers from no freezing problems

• Different pump configurations and a comprehensive product palette guarantee a wide range of possible applications

Designed for versatility in application

The ZIP 52 double diaphragm pumps are available in stainless steel and aluminum models to fit any type of application needs for material supply

Two coupled diaphragms are moving from the left to the right and back with help of pressurized air. The steering valve guides the air to the side where the diaphragm is moved to contract the fluid chamber. Material is transported by contraction and expansion of the fluid chamber volume through the inlet and outlet valves.

Applications

  • Airless and Air Coat applications up to 250 bar in furniture construction, metal industry, general-purpose finishing (incl. water and solvent-based paints, moisture-sensitive materials, shear-sensitive coatings, UV-cure materials, and temperature reactive materials).
  • The pump is also suitable for highly abrasive materials.

Technical Specifications

Pump Ratio

1:1

Material Inlet

F-G 1/2"

Max. Suction Lift

4.9, 16.1 ft

Air Inlet Pressure

1,0 - 8,0 bar, 15-116 PSI

Material Temperature

4-90, 38.2-194.0

Operating Pressure

8 Bar, 116 PSI

Volumetric Flow with Free Drainage

521/min, 13.7 Gpm

Material Outlet

F-G1/2"

Particle Size

2mm, 0.08 in

Sound Level at 40 Cycles and 6 bar air inlet Pressure

76 dB(A)/