Binks Trophy Series Full Size Gravity Feed Manual Spray Gun

$720.00

Trophy Series Full Size Gravity Feed Manual Spray Guns

Manufacturer: Carlisle Binks

Part #: 2466-XXXX-XXXX

Description: Binks Trophy Series Spray Guns are the premier spray guns for use in pressure, gravity and suction applications. The lightweight and ergonomic design provides unsurpassed comfort and control. The large selection of fluid nozzles and needle materials means that this versatile gun range can be used on almost any coating application. Available in HVLP, LVMP (Trans-Tech) or CONVentional spray technologies, these guns incorporate the latest advanced atomization technology. Use the Binks Trophy Series Spray guns to achieve a consistent fine finish with a wide range of industrial coatings.

Binks has developed a broad selection of spray guns, air caps and fluid tips to provide users with the right gun with the perfect air cap for the job. The completely new air cap designs provide uniform spray patterns with consistent atomization from top to bottom.

Trophy spray guns are available in the following technologies:

  • LVMP (Green) - (Low Volume Medium Pressure) Also referred to as Trans-Tech, provides equal to or greater transfer efficiency at slightly higher air pressures than HVLP.
  • HVLP (Blue) - (High Volume Low Pressure) Air pressure is less than 10 PSI at the air cap meeting all European and USA standards and regulatory requirements.
  • Conventional (Brown) - For spray applications requiring higher air pressure. Also suitable for viscous material set-ups.

Refer to the following chart for air cap specifications:

Conventional Air Cap Specifications:
Air Cap Spray Pattern CFM @ 30 psi CFM @ 50 psi CFM @ 70 psi
12-C 4-12" 8.3 12.1 14.2
LVMP - Low Volume Medium Pressure Air Cap Specifications:
Air Cap Spray Pattern CFM @ 30 psi Gun Inlet
23-L 4-12" 10.6
HVLP - High Volume Low Pressure Air Cap Specifications:
Air Cap Spray Pattern SCFM @
10 PSI Cap
Pressure
Gun Inlet
PSI @ 10 PSI
at Air Cap
32-H 8-18" 18.5 24

 

 *All models come with stainless steel fluid nozzles and needles. Tungsten carbide and plastic tip needles available in Parts and Accessories below*

Ergonomics taken seriously - Binks Trophy Series Spray Guns feel different by design. They’re lighter and are easier to handle over longer periods of time. That means operators can spray for longer periods with less fatigue and injury. This can make a big difference to productivity and your profitability. That’s why we take ergonomics so seriously.

  • Light weight – one of the lightest, top quality spray gun range available.
  • Designed for the hand – our gun designers tested a variety of hand sizes and grips to come up with the ideal design for the Trophy. The form is ultimately about function and reduced stress.
  • Trigger pull – the easy light trigger pull action is created by the unique, built-in stabilisation features.
  • No kick air valve – delivers the smoothest pull on the market. Virtually eliminates any recoil from triggering.
  • Knobs and air cap rings – all the hand adjustments have been designed and manufactured to make it virtually effortless to “dial –in” your settings or remove parts for maintenance or substitution.

Manual

Parts View

Parts and Accessories:

Fluid Needles and Nozzles:

Air Caps:

Test Air Caps:

Gravity Cup -

Spare Parts List (Refer to Manual) -

Ref. No. Part No. Description
1 54-6120 AIR CAP RETAINING RING ASSEMBLY
5 (See Above) AIR CAP
6 JGA-156-K10 SPRING-CLIP (KIT OF 10)
7 (See Above) FLUID NOZZLE
8 54-6102-K3 BAFFLE/SEPARATOR (KIT OF 3)
9 54-6122 SIDE PORT VALVE ASSEMBLY
10 (Included in 54-6122) RETAINING CLIP
11 (Included in 54-6122) BODY BUSHING
12 (Included in 54-6122) O-RING
13 (Included in 54-6122) SIDE PORT STEM
14 (Included in 54-6122) PIN
15 54-6131-K AIR VALVE SERVICE KIT
16 (Included in 54-6131-K) FRONT SEAL – AIR VALVE
17 (Included in 54-6131-K) FRONT AIR VALVE SEAL
18 54-6109 AIR VALVE SPINDLE
19 (Included in 54-6131-K) AIR VALVE SPRING
20 (Included in 54-6131-K) REAR SEAL – AIR VALVE
21 SN-66 HOUSING
22 (See Above) NEEDLE
23 54-6133-K3 SPRING/PAD ASSEMBLY (KIT OF 3)
24 54-6111 KNOB – NEEDLE ADJUSTING
25 54-6130-K NEEDLE PACKING KIT (STANDARD)
26 (Included in 54-6130-K) NUT – PACKING
27 (Included in 54-6130-K) SPRING FOR PACKING
28 SN-2-K3 NEEDLE PACKING (STANDARD)
29 54-4360 TRIGGER
30 54-6132-K TRIGGER SCREW NUT KIT
31 (Included in 54-6132-K) TRIGGER SCREW
32 (Included in 54-6132-K) TRIGGER NUT
33 54-3513 SPINDLE CAP
34 SN-11 PLUG
35 54-6112 FITTING – AIR INLET

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods